24 hour emergency electrician Typical response 1 hour across Whitstable 07366 354 116

Fixed prices in writing

Shop Fit-Out Electrical in Whitstable

We deliver shop fit-out electrical work across Whitstable with planned isolations, phased installation and documented coordination to help protect your trading hours. We install lighting, dedicated power circuits, consumer units, security feeds and emergency lighting, then inspect, test and certify the completed work. Our written quotations define scope, exclusions and responsibilities before work starts. We can schedule lower-impact tasks around your opening times and site rules. Below, you’ll find typical works, costs, compliance records and planning arrangements.

Three-phase distribution board in a commercial plant room
Commercial and industrial electrical work
  • NICEIC approved
  • Part P registered
  • £5m public liability
  • 12-month workmanship guarantee
  • Fixed price before we start
Shop Fit-Out Electrical in Whitstable

What we do and who it is for

Commercial shop-fit electrical installations and alterations from fixed-price quotations to consumer-unit upgrades and emergency lighting. Whitstable and surrounding areas. Work guaranteed with NICEIC approval and Part P registration, fully certified on completion.

In Whitstable and Tankerton, Seasalter and Swalecliffe we work across white weatherboarded fishermen's cottages in the old town, Victorian and Edwardian stock in Tankerton, newer housing at Swalecliffe, many holiday lets. The recurring themes are salt-air corrosion on exterior and beach-hut electrics, coastal flood-risk electrics, holiday-let safety certificates; we explain what we find in plain English and put a fixed price in writing before any work begins.

Typical jobs

  1. In The Lanes and North Laine we upgrade lighting to improve product visibility in narrow, older shopfronts while preserving the required emergency-lighting provision for buildings with flats above (late‑19th‑century terraces).
  2. Where we replace consumer units in Brunswick neighbourhood shops and in Portslade parade properties we carry out testing and provide certification tailored to landlords and managing agents who manage mixed‑use Victorian terraces and mid‑20th‑century retail blocks.

We plan installations around trading hours for each Brighton and Hove location named above, isolate only the areas necessary in those specific premises, and record all alterations against the exact circuit layout of the particular property. If an existing installation in any of these Brighton and Hove properties shows concerns — for instance, ageing wiring in a 19th‑century terrace or inadequate bonding in an interwar parade shop — we explain what needs attention for that specific property before we proceed.

What it costs

We provide fixed written prices for shop-fit electrical work in Whitstable, covering parts, labour, testing, certification and VAT so you know the full cost before work starts. Below are our standard charges and what each covers.

Job Price What's included
Labour £80 per hour Labour for installation and repairs, testing and basic certification
Day rate £600 Full-day onsite labour and standard testing
Commercial EICR £30–£50 per circuit Electrical installation condition report and associated certification (price per circuit)
Fault finding £80 per hour Tracing and diagnosing faults (most faults traced within one to two hours)
PAT testing From £1.50 per item; £80 minimum Portable appliance testing and certification (minimum charge applies)
Out-of-hours emergency £120 per hour (first hour minimum) Emergency call-out and urgent fault resolution outside normal hours

Not included: plaster/decoration making-good, asbestos removal, DNO supply-upgrade charges, scaffold/access equipment, and any additional works quoted separately.

How the work is planned

Once the scope and fixed price are agreed, we plan the shop fit-out around your trading hours, programme and safety requirements. We begin with a site survey to confirm access routes, existing supplies, ceiling voids, containment options and any constraints affecting installation methods.

We then sequence works with your shopfitter, landlord, centre management and other trades. Stakeholder coordination helps prevent clashes over deliveries, ceiling closures, joinery and final merchandising. Where practical, we schedule noisier or access-restrictive tasks outside opening hours and keep work areas controlled, tidy and clearly separated from customers and staff.

Before starting, we agree shutdown windows, temporary power needs and points of contact for day-to-day decisions. Our electricians work to the agreed programme, flagging foreseeable issues early so you can protect opening dates and minimise disruption to trading.

Compliance and documentation

Compliance is incorporated into the fit-out: installation work is tested, inspected and documented before handover, and we provide electrical certification and clear records for your premises to show systems have been installed and maintained in accordance with the Electricity at Work Regulations 1989 so far as they apply.

Contrary to a common belief, there is no single statutory interval for commercial EICRs; the often‑quoted five‑year office, three‑year industrial and annual periods come from IET Guidance Note 3 (best practice guidance), not primary legislation. The actual duty is to ensure electrical systems are maintained so as to prevent danger, and insurers, landlords or licensing bodies may require a current report as part of their own conditions.

Our record‑keeping gives you an accessible compliance trail for future inspections, alterations and maintenance. We can also help you understand statutory exemptions guidance where applicable, making clear what is guidance, what is contractual or insurance requirement, and what is a legal obligation.

Minimal disruption and out-of-hours working

Clear records also support a well-planned installation programme, so we’ll schedule your Whitstable shop fit-out around trading hours, deliveries and access requirements where possible. Before work begins, we’ll agree phased tasks, isolation windows and clear handover points, recording responsibilities and any operational constraints in writing.

Where suitable, we can complete disruptive activities out of hours, including containment installation, circuit alterations and testing, subject to safe access and agreed arrangements. Our noise mitigation measures can include sequencing drilling and cutting, protecting finished surfaces, controlling dust and keeping work areas orderly. We’ll maintain safe segregation, label temporary supplies where required and document completed circuits, inspection results and certificates promptly. This helps you reopen areas confidently, reduces avoidable interruption and gives you a clear record of the electrical work completed.

Premises and sites around Whitstable

In Whitstable and Tankerton, Seasalter and Swalecliffe we work across white weatherboarded fishermen's cottages in the old town, Victorian and Edwardian stock in Tankerton, newer housing at Swalecliffe, many holiday lets. The recurring themes are salt-air corrosion on exterior and beach-hut electrics, coastal flood-risk electrics, holiday-let safety certificates; we explain what we find in plain English and put a fixed price in writing before any work begins.

What it costs

JobWhat is includedPrice inc. VAT
EICR, up to 3-bedFull inspection, test results and report£150–£250
EICR, 4–5 bedFull inspection, test results and report£250–£350
PAT testingMinimum visit £80from £1.50/item
Consumer unit (fuse box) replacementBoard, RCBO/RCD protection, testing, certificate£500–£700
Out-of-hours emergencyFirst hour minimum, 24 hours a day£120/hr

All prices include VAT, parts, labour, testing and the certificate. Not included: making good plaster and decoration, asbestos removal, DNO charges for a supply upgrade, scaffold or access equipment. Fixed price in writing before we start — the bill is never larger than the quote.

Frequently asked questions

1) Who is responsible for the shop electrical work and who pays for the fittings?

Yes — we’ll put the agreed scope in writing, state who supplies fittings, who coordinates other trades, and list responsibilities and costs before work starts so you know who pays for what.

2) Do you test and certify the electrical work when it’s finished?

Yes — before energising we inspect, test and issue the correct electrical certification for completed work and keep records for future checks.

3) What if the existing wiring is unsafe or causes extra work?

Yes — we’ll record any defects that affect safety, explain remedial options and cost impacts, and agree how to proceed before continuing.

4) Can you work without shutting the whole shop and when can you work?

Yes — we’ll agree access hours, phased work areas and shutdown windows with you and your site team to reduce disruption.

5) How much will the shop fit-out cost and what does the quote include?

A fixed quotation — it lists inclusions, exclusions and payment terms so you know exactly what’s covered before work begins.

6) Do you give a warranty and what paperwork do you keep?

12 months — we provide a 12-month workmanship guarantee; manufacturer warranties follow their terms, and we retain records for future alterations, maintenance and compliance.

Get a fixed price

Ring us or send a photo of the job. We give a fixed price in writing before any work starts, and the bill is never larger than the quote.

Call 07366 354 116 · 24hr